High chair

Tripp Trapp® Chair

High chair

Manufacturer: stokke.com

Product page: Official source

Manual: View manual

Age & weight limits

  • High chair mode with Tripp Trapp® Baby Set²: from when the child can sit unaided (approx. 6 months) until 36 months, 15 kg, or when the child can go safely in and out of the chair on its own accord, whichever occurs first.
  • Tripp Trapp® Newborn Set: intended for children up to 9 kg, 0-6 months, or when the child can sit unaided, whichever occurs first; discontinue use when the child is able to sit upright unassisted or weighs more than 20 lb (9.1 kg).
  • Tripp Trapp® Chair maximum recommended load: 136 kg / 300 lb.

Transitions

Key transitions

Adjustments and changes as your baby grows, in the order they typically come up.

Optional: Use Newborn Set from birth

Informational

From birth, with the Tripp Trapp® Newborn Set.

Attach the Newborn Set to the Tripp Trapp® chair and secure the child with the 5-point harness. Stokke states the Newborn Set has 2 angle-adjustable positions.

Re-fit Newborn Set harness

Safety critical

Adjust regularly as your child grows.

Make sure the Newborn Set harness is snugly fitted, and keep the child secured by the restraining system in either the reclining or upright position.

Discontinue Newborn Set

Safety critical

When the child can sit unaided / sit upright unassisted, or weighs more than 20 lb (9.1 kg); the Newborn Set is intended for children up to 9 kg, 0-6 months, whichever occurs first.

Stop using the Tripp Trapp® Newborn Set. Move to the Baby Set² only when the child can sit unaided.

Start Baby Set² high-chair mode

Safety critical

From the time your child can sit unaided / sit up unassisted (approx. 6 months).

Install the Baby Set² with the seat plate in the top slot / first groove from the top. Use the Baby Set², restraint system, and Extended Gliders when Tripp Trapp® is used as a high chair.

Adjust Baby Set² harness fit

Safety critical

As your child grows; always use restraints and adjust to fit snugly.

Re-fit the 5-point harness so it stays snug. The Baby Set² harness adjustment page shows length adjustment at the shoulder and waist straps and fastening both sides into the center buckle until they click.

Adjust seat and footrest fit

Recommended

As the child grows — check at least once a year.

Adjust the seat and footrest height and depth to your child. The seat should support 3/4 of the thighs, elbows should be level with the table, the soles should rest flat on the footrest, and the footrest must not protrude past the front tip of the chair legs. Stokke also recommends a minimum of two open grooves between the seat plate and the footplate.

Stop high-chair mode / remove Baby Set²

Safety critical

At 36 months, 15 kg, or when the child can go safely in and out of the chair on its own accord, whichever occurs first.

Stop using Tripp Trapp® as a high chair with the Baby Set² and harness. If continuing to use the chair, re-adjust the seat and footrest for the child's size.

Safety

Usage warnings

  • Do not use the high chair before the child can sit up unassisted.
  • Always use the restraints / harness and adjust to fit snugly.
  • Never leave the child unattended.
  • Newborn Set: only use attached to the high chair; never place it with the child in it on the floor or on an elevated surface.
  • Discontinue Newborn Set use when the child is able to sit upright unassisted or weighs more than 20 lb (9.1 kg).

Details

Product notes

Compatibility

  • Use from birth with the Tripp Trapp® Newborn Set and from 6 months with the Tripp Trapp® Baby Set²; both are sold separately.
  • The seat should always be in the first groove from the top when used with the Tripp Trapp® Baby Set, in order not to damage the rail.
  • The Baby Set², restraint system, and Extended Gliders shall always be in use when Tripp Trapp® is used as a high chair.
  • For older Tripp Trapp® chairs manufactured between 2008 and 2018 with a pre-attached harness, Stokke instructs removing that older harness from the chair before fitting the current Baby Set² with pre-attached harness.

Setup notes

  • Set the seat and footplate in the correct position for your child before tightening the screws.
  • When using the Baby Set², the seat plate must be in the top slot / first groove from the top.
  • Check the seat and footrest position as the child grows, at least once a year.
  • Seat placement: elbows level with the table top; seat depth should support 3/4 of the thighs.
  • Footrest placement: the sole of the child's foot should rest flat on the footrest while the thighs touch the seat; the forward edge of the footrest must never protrude beyond the front tip of the chair legs.
  • Stokke recommends a minimum of two open grooves between the seat plate and the footplate at all times.
  • Rough footrest guide from the chair manual: groove 5 (15-17 cm) with Newborn Set; groove 5 (15-17 cm) with Baby Set phase (1/2-3 years); groove 8 / any for 3-5 years; groove 11 / any for 6-8 years; groove 13 / any for 9-11 years; teen/adult: use the foot plate as the seat in groove 4 or 5, and the bottom metal rod can be removed.

Care instructions

  • Chair / Baby Set²: wipe with a clean damp cloth and wipe off excess water with a dry cloth; do not use detergent.
  • Newborn Set plastic parts: clean with warm water and mild soap.
  • Stokke notes colors may change if the chair is exposed to sunlight.

Sourced from the manufacturer's official documentation. View official source.